This handy tool allows you to determine how much glue you need to carry out your projects. Simply enter the product name and the quantity to be installed in metres and let the tool take care of the rest.
Glue consumption depends on the dimensions of the profile and the nature of the application surface. Determine the exact amount of glue necessary by carrying out a test installation. We strongly recommend that you always consult our installation videos and review the product’s technical data sheet before installation.
Cornices, ceiling roses, design elements, chair rails, wall panels, skirtings, cover skirtings and profiles for indirect lighting can be installed with the decoflair CM glue.
Other dispersion adhesives are also suitable for installation.
For the installation of ceiling tiles, we recommend using other dispersion adhesives rather than decoflair CM. Expanded polymer and low-density extruded polymer products can also be installed with the Decofit P glue. We do not guarantee the use of any other dispersion adhesives. The manufacturers' application instructions must be followed.
Always leave a 3mm gap between the profiles, which should then be filled in with decoflair glue. For more details on jointing and installation, go to the installation page.
Do not apply an adhesive joint between OCEAN or SAHARA wall panels, but rather leave an open joint of 1 to 2 mm. The wall panels are only to be joined to the wall or ceiling.